Newport Brass 106H East Linear Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.75 lbs
Length per Each: 18 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
106H/01106H/034106H/03N106H/04106H/06106H/07106H/08A106H/10106H/10B106H/15106H/15A106H/15P106H/15S106H/20106H/24106H/24A106H/24S106H/26106H/30106H/52106H/56106H/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0091388720284076072454821800913887203070760724221890009138872031400913887203210091388720345009138872036900913887203760091388248399009138872039007091803004420091388300592009138829500300913887204130760724221937076072422197500913882950270709180175408076072422201900913887204510760724222095