Newport Brass 107 Nadya Hot & Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-7/16 in. (16.4 cm) spout height at outlet
4-13/16 in. (12.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 1.78 lbs
Length per Each: 18 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
107/01107/034107/03N107/04107/06107/07107/08A107/10107/10B107/15107/15A107/15P107/15S107/20107/24107/24A107/24S107/26107/30107/52107/56107/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0091388720499076072454823200913887205050091388720529009138872053600913887205430091388720567009138872058100913882119350091388248856009138872060407091800957130091388295348009138872063500913887206590760724222132009138872066600913882954230709180175415076072422217000913887207030760724222255