Newport Brass 108H Chesterfield Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
5-11/16 in. (14.4 cm) spout height at outlet
5-3/16 in. (13.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.0 lbs
Length per Each: 18 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
108H/01108H/034108H/03N108H/04108H/06108H/07108H/08A108H/10108H/10B108H/15108H/15A108H/15P108H/15S108H/20108H/24108H/24A108H/24S108H/26108H/30108H/52108H/56108H/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0091388722790076072454839300913887228130091388722837009138872284400913887228510091388722875009138872289900913882382150091388252501009138872292907091803005100091388227561009138822760800913887229500760724223337009138872296700913882987070709180175484076072422341200913887230180760724223535