Newport Brass Chesterfield Hot & Cold Water Dispenser Forever Brass PVD - 108/01
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
5-11/16 in. (14.4 cm) spout height at outlet
5-3/16 in. (13.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 1.96 lbs
Length per Each: 18 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
108/01108/034108/03N108/04108/06108/07108/08A108/10108/10B108/15108/15A108/15P108/15S108/20108/24108/24A108/24S108/26108/30108/52108/56108/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0091388721816076072454829400913887218230091388201226009138872184700913887218540091388721878009138872189200913882978230091388297960009138820127107091800878860091388201288009138872193900913887219530760724222613009138872196000913882376140709180175446076072422265100913887220040760724222736