Newport Brass 1030_5613 Chesterfield Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/2 in. (16.5 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.3 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
1030-5613/011030-5613/0341030-5613/03N1030-5613/041030-5613/061030-5613/071030-5613/08A1030-5613/101030-5613/10B1030-5613/151030-5613/15A1030-5613/15P1030-5613/15S1030-5613/201030-5613/241030-5613/24A1030-5613/24S1030-5613/261030-5613/301030-5613/521030-5613/561030-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0760724622598076072462263507607246226730760724622758076072459929607607246227960760724622833076072462291807607246229560760724599302076072462303807091803003670760724599319076072462315107607246231990760724623236076072462327407607245993260709180175248076072465485807607246234100760724623533