Newport Brass 1200_5623 Metropole Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Traditional lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
7-5/16 in. (18.6 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 3.65 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
1200-5623/011200-5623/0341200-5623/03N1200-5623/041200-5623/061200-5623/071200-5623/08A1200-5623/101200-5623/10B1200-5623/151200-5623/15A1200-5623/15P1200-5623/15S1200-5623/201200-5623/241200-5623/24A1200-5623/24S1200-5623/261200-5623/301200-5623/521200-5623/561200-5623/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0760724476504076072454877507607244765110760724476535076072447003807607244688750760724476559076072447657307607244688990760724470045076072447659707607245694800760724470052076072446888207607244766030760724476610076072447662707607244689120709180175767076072447664107607244766650760724476696