Newport Brass 2500_5613 Vespera Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
7-7/16 in. (18.9 cm) spout height at outlet
3-15/16 in. (10.0 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.3 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
2500-5613/012500-5613/0342500-5613/03N2500-5613/042500-5613/062500-5613/072500-5613/08A2500-5613/102500-5613/10B2500-5613/152500-5613/15A2500-5613/15P2500-5613/15S2500-5613/202500-5613/242500-5613/24A2500-5613/24S2500-5613/262500-5613/302500-5613/522500-5613/562500-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0760724448754076072455478307607244459130760724446545076072442656107607244473440760724431770076072444210307607244265780760724433446076072444934807091803026060760724427308076072442655407607244318310760724443193076072444375907607244265470709180178287076072444097007607244270320760724448136