Newport Brass 3170_5603 Adams Hot & Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-5/8 in. (16.8 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
Weight per Each: 4.6 lbs
Length per Each: 17 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
3170-5603/013170-5603/0343170-5603/03N3170-5603/043170-5603/063170-5603/073170-5603/08A3170-5603/103170-5603/10B3170-5603/153170-5603/15A3170-5603/15P3170-5603/15S3170-5603/203170-5603/243170-5603/24A3170-5603/24S3170-5603/263170-5603/303170-5603/523170-5603/563170-5603/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180053508070918005351507091800535220709180053546070918005355307091800535600709180053577070918005359107091800536070709180053621070918005363807091802536940709180053645070918005365207091800536690709180053676070918005368307091800536900709180180730070918005371307091800537370709180053768