Newport Brass 3170_5613 Adams Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-5/8 in. (16.8 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.3 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3170-5613/013170-5613/0343170-5613/03N3170-5613/043170-5613/063170-5613/073170-5613/08A3170-5613/103170-5613/10B3170-5613/153170-5613/15A3170-5613/15P3170-5613/15S3170-5613/203170-5613/243170-5613/24A3170-5613/24S3170-5613/263170-5613/303170-5613/523170-5613/563170-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180053775070918005378207091800537990709180053812070918005382907091800538360709180053843070918005386707091800538740709180053898070918005390407091803039170709180053911070918005392807091800539350709180053942070918005395907091800539660709180180747070918005398007091800540000709180054031