Newport Brass 3170_5623 Adams Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-5/8 in. (16.8 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 3.65 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3170-5623/013170-5623/0343170-5623/03N3170-5623/043170-5623/063170-5623/073170-5623/08A3170-5623/103170-5623/10B3170-5623/153170-5623/15A3170-5623/15P3170-5623/15S3170-5623/203170-5623/243170-5623/24A3170-5623/24S3170-5623/263170-5623/303170-5623/523170-5623/563170-5623/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180054048070918005405507091800540620709180054086070918005409307091800541090709180054116070918005413007091800541470709180054161070918005417807091803039240709180054185070918005419207091800542080709180054215070918005422207091800542390709180180754070918005425307091800542770709180054307