Newport Brass 3180_5603 Seager Hot & Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
Weight per Each: 4.6 lbs
Length per Each: 17 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
3180-5603/013180-5603/0343180-5603/03N3180-5603/043180-5603/063180-5603/073180-5603/08A3180-5603/103180-5603/10B3180-5603/153180-5603/15A3180-5603/15P3180-5603/15S3180-5603/203180-5603/243180-5603/24A3180-5603/24S3180-5603/263180-5603/303180-5603/523180-5603/563180-5603/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180110980070918011099707091801110000709180111024070918011103107091801110480709180111055070918011107907091801110860709180111109070918011111607091803040750709180111123070918011113007091801111470709180111154070918011116107091800894910709180181010070918011118507091801112080709180111239