Newport Brass 3190_5613 Heaney Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.3 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3190-5613/013190-5613/0343190-5613/03N3190-5613/043190-5613/063190-5613/073190-5613/08A3190-5613/103190-5613/10B3190-5613/153190-5613/15A3190-5613/15P3190-5613/15S3190-5613/203190-5613/243190-5613/24A3190-5613/24S3190-5613/263190-5613/303190-5613/523190-5613/563190-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180110232070918011024907091801102560709180110270070918011028707091801102940709180110300070918011032407091801103310709180110355070918011036207091803041670709180110379070918011038607091801103930709180110409070918011041607091800896750709180181126070918011043007091801104540709180110485