Newport Brass 3190_5623 Heaney Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 3.65 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3190-5623/013190-5623/0343190-5623/03N3190-5623/043190-5623/063190-5623/073190-5623/08A3190-5623/103190-5623/10B3190-5623/153190-5623/15A3190-5623/15P3190-5623/15S3190-5623/203190-5623/243190-5623/24A3190-5623/24S3190-5623/263190-5623/303190-5623/523190-5623/563190-5623/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180109977070918010998407091801099910709180110010070918011002707091801100340709180110041070918011006507091801100720709180110096070918011010207091803041740709180110119070918011012607091801101330709180110140070918011015707091800896820709180181133070918011017107091801101950709180110225