Newport Brass 3200_5603 Jeter Hot & Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
Weight per Each: 4.6 lbs
Length per Each: 17 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
3200-5603/013200-5603/0343200-5603/03N3200-5603/043200-5603/063200-5603/073200-5603/08A3200-5603/103200-5603/10B3200-5603/153200-5603/15A3200-5603/15P3200-5603/15S3200-5603/203200-5603/243200-5603/24A3200-5603/24S3200-5603/263200-5603/303200-5603/523200-5603/563200-5603/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180055946070918005595307091800559600709180055984070918005599107091800560040709180056011070918005603507091800560420709180056066070918005607307091803042280709180056080070918005609707091800561030709180056110070918005612707091800561340709180181218070918005615807091800561720709180056202