Newport Brass 3200_5613 Jeter Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.3 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3200-5613/013200-5613/0343200-5613/03N3200-5613/043200-5613/063200-5613/073200-5613/08A3200-5613/103200-5613/10B3200-5613/153200-5613/15A3200-5613/15P3200-5613/15S3200-5613/203200-5613/243200-5613/24A3200-5613/24S3200-5613/263200-5613/303200-5613/523200-5613/563200-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180056219070918005622607091800562330709180056257070918005626407091800562710709180056288070918005630107091800563180709180056332070918005634907091803042350709180056356070918005636307091800563700709180056387070918005639407091800564000709180181225070918005642407091800564480709180056479