Newport Brass 3210_5603 Gavin Hot & Cold Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handles
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-5/8 in. (16.8 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
Weight per Each: 4.6 lbs
Length per Each: 17 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
3210-5603/013210-5603/0343210-5603/03N3210-5603/043210-5603/063210-5603/073210-5603/08A3210-5603/103210-5603/10B3210-5603/153210-5603/15A3210-5603/15P3210-5603/15S3210-5603/203210-5603/243210-5603/24A3210-5603/24S3210-5603/263210-5603/303210-5603/523210-5603/563210-5603/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180058374070918005838107091800583980709180058411070918005842807091800584350709180058442070918005846607091800584730709180058497070918005850307091802727180709180058510070918005852707091800585340709180058541070918005855807091800585650709180181515070918005858907091800586020709180058633