Newport Brass 3210_5613 Gavin Hot Water Dispenser
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-5/8 in. (16.8 cm) spout height at outlet
4-3/4 in. (12.1 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
Hot Water Tank (item 5-036) sold separately.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 4.3 lbs
Length per Each: 18 in.
Width per Each: 12.25 in.
Height per Each: 3.25 in.
The following part numbers are available by selecting the options above.
3210-5613/013210-5613/0343210-5613/03N3210-5613/043210-5613/063210-5613/073210-5613/08A3210-5613/103210-5613/10B3210-5613/153210-5613/15A3210-5613/15P3210-5613/15S3210-5613/203210-5613/243210-5613/24A3210-5613/24S3210-5613/263210-5613/303210-5613/523210-5613/563210-5613/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0709180058640070918005865707091800586640709180058688070918005869507091800587010709180058718070918005873207091800587490709180058763070918005877007091801523790709180058787070918005879407091800588000709180058817070918005882407091800588310709180181522070918005885507091800588790709180058909