Newport Brass East Linear Cold Water Dispenser Stainless Steel PVD - 106C/20
For single hole configurations
Solid brass construction
ADA Compliant Lever Handle
Contemporary lever handle design
Spring-loaded, normally closed lever handle
Quarter-turn washerless ceramic disc valve cartridges
Spout assembly with integral supply hoses
6-1/4 in. (15.9 cm) spout height at outlet
4 in. (10.2 cm) spout reach (c-c)
1 gallon (3.6 liters) per minute maximum flow rate
Specify finish when ordering.
A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Meets or exceeds ASME A112.18.1/CSA B125.1, IAPMO/cUPC, IPC, NSF 61, NFS 372, and all applicable US Federal and State material regulations.
Meets Energy Policy Act of 1992
Lead Law Compliant
California Energy Commission (CEC) Compliant
Weight per Each: 3.55 lbs
Length per Each: 13 in.
Width per Each: 12 in.
Height per Each: 3 in.
The following part numbers are available by selecting the options above.
106C/01106C/034106C/03N106C/04106C/06106C/07106C/08A106C/10106C/10B106C/15106C/15A106C/15P106C/15S106C/20106C/24106C/24A106C/24S106C/26106C/30106C/52106C/56106C/VB
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.
0091388720055076072454819500913887200790091388720093076072417772200913887201090091388720123009138872014700913887201540091388294402009138872017807091800968710091388294501009138827281300913887201850760724221654076072422169200913882946240709180175392076072422173900913887202390760724221814